At the heart of every Wilson Audio® product, you will find designs specifically created to elevate the audio playback experience in your home.
This beautiful subwoofer is handcrafted by the same artisans and professionals who sculpt all Wilson Audio loudspeakers made in the United States of America.
Wilson Audio’s Smallest Subwoofer
From the beginning, the Wilson Audio Special Application Engineering® team wanted to create a subwoofer system that follows the North Star development parameters set forth by David Wilson. We are excited to demonstrate how much of David’s original intent is captured by Lōkē and invite you to visit your local authorized Wilson Audio Dealer for an unforgettable musical experience that will reshape your thinking around small footprint subwoofer systems.
LōKē® is an all-in-one, simple to setup, and easy to manage subwoofer solution. Incorporated into LōKē’s built-in amplifier (500 watts) are the most utilized functions from Wilson Audio’s acclaimed ActivXO® Dual Subwoofer Crossover, including such key parameters as crossover frequency, crossover slope, phase, and level.
This can be used in a home audio or home cinema system.
Please note this is a special order item & there is a large selection of colour options that are available that have not been listed.
This item would need to be purchased via the showroom & not online.
All the Wilson Audio range is available to purchase from us.
Please feel free to get in touch to discuss your Wilson Audio Loke Subwoofer options.
LōKē Technical Specifications
Driver & Amplifier
Woofer: 10 inch Woofer (25.4 cm)
Amplifier Power: 500 watts
Frequency Response (Amplifier): 20 Hz to 250 Hz (+/- 1 dB)
Effective Piston Area: 21.75 in^2
Effective Displacement: 33.42 in^3
Dimensions
Height: 20 3/4 inches (52.71 cm
Width: 13 7/8 inches (35.24 cm)
Depth (With Grill): 21 3/4 inches (55.24 cm
Depth (No Grill): 21 inches (53.34 cm)
System Weight: 110 lbs each (49.9 kg)
Total System Shipping Weight (Approximate): 175 lbs (79.38 kg)
Parameters
Test Conditions
Typical Value
Input Sensitivity (L+R)
RCA IN 520W/4ohms @115VAC
-10dBV
XLR IN 500W/4ohms @115VAC
-10dBV
Input Sensitivity (L+R)
RCA IN Normal input level switch
310 mVrms
RCA IN Hi-Level input level switch
620 mVrms
(Signal in Left and Right)
XLR IN Normal input level switch
630 mVrms
XLR IN Hi-Level input level switch
1.25 Vrms
Max Input Level (L+R)
RCA IN Normal input level switch
1.1 Vrms
RCA IN Hi-Level input level switch
2.3 Vrms
XLR IN Normal input level switch
2.4 Vrms
XLR IN Hi-Level input level switch
4.6 Vrms
Input Impedance
RCA IN
10k ohms
XLR IN
20k ohms
Gain
AMP output 100Hz @ 1W output
+43.3 dB (normal)
+37.2 dB (Hi- Level IN)
Input Saturation Level
RCA left or right 100Hz
>2V (Hi-Level IN)
XLR left or right 100Hz
>2V (Hi-Level IN)
Noise Level
volume=0dB (MAX)@A weighted
-62.3dBV
S/N Ratio
volume=0dB (MAX)@A weighted
98.4 dB
THD+N Ratio
20-20kHz Filter, Rated Power @100Hz
< 1%
Frequency Response
Amplifier output
20 Hz to 250 Hz (+/- 1 dB)
Output Power (4Ω)
100Hz@115VAC, Input: -10dBV (L+R)
500 W
Auto ON/OFF
Auto ON Sensitivity
RCA Left ,100Hz
3mV
Auto OFF Time
20mins
Time Delay
2ms
Power Amplifier Protection
A- Short-circuit and under load protection
A-Yes
B- Thermal protection
B-Yes
C-Power Supply Protection-Full Power Protection
C-Yes
Power Consumption
@230Vac/60Hz A- Standby mode
A- 0.5 W — 0.05 A
@230Vac/60Hz B- ON mode
B- 8.0 W — 0.13 A
@230Vac/60Hz C- 1/8 power
C- 83 W — 0.88 A
@230Vac/60Hz D- 1/4 power
D- 157 W — 1.61 A
@230Vac/60Hz E- Rated power
E- 626 W — 5.6 A
@115Vac/60Hz A- Standby mode
A- 0.5 W — 0.05 A
@115Vac/60Hz B- ON mode
B- 7.7 W — 0.18 A
@115Vac/60Hz C- 1/8 power
C- 83 W — 1.51 A
@115Vac/60Hz D- 1/4 power
D- 162 W — 2.78 A
@115Vac/60Hz E- Rated power
E- 654 W — 9.4 A